Introduction

The rotary tube furnace is specially designed to obtain better consistency when sintering inorganic compounds. It is especially suitable for preparing negative electrode materials with conductive coatings for lithium-ion batteries; it can also be used for uniform drying and calcination of materials. The furnace body can be tilted 30 degrees and the furnace tube can be rotated 360 degrees. According to needs, it can also be made into dual temperature zones.

Features

● Maximum temperature 1200oC .

● Intelligent 50 -segment programmable automatic temperature control .

● Heating rate 0~20 o C /min .

● Temperature control accuracy ±1 oC . _

● The top-opening furnace cover design allows real-time observation of the heated materials.

● The tilt angle of the furnace body can be adjusted from 0 to 30 degrees , making it easy to load and unload materials.

● The furnace tube speed is 0 ~ 15 rpm (reversible) . There are 3 quartz lifting plates on the inner wall of the furnace tube . When rotating, the materials are fully turned over and heated evenly.

● It has safe operation functions such as power-off when opening the door, over-temperature alarm, and leakage protection.

Standard accessories

2 pipe plugs ; 1 furnace tube; 1 vacuum pump; 1 set of vacuum flanges; 1 vacuum pressure gauge .

Technical Parameters